VGTU Phase I Report (2016): Spectrum Analyzer Testing Shows 27% Average Reduction in Electric Field Strength at 0.9–2.5 GHz
Independent laboratory testing at Vilnius Gediminas Technical University (VGTU) Photovoltaic Technology Laboratory. Three Aires EMR resonator-converters tested across 0–8 GHz using Signal Hound Spectrum Analyzer, with sources from 0.5 W to 800 W. Key result: 27% average electric field reduction.
Testing Institution and Context
This Phase I report was commissioned by UAB AIRESLITA (Vilnius) and conducted at the Laboratory of Photovoltaic Technology, Sauletekio av. 3, Vilnius — a certified research facility of Vilnius Gediminas Technical University (VGTU). Laboratory head: Dainius Jasaitis. Physics department consultant and head: Prof. Artūras Jukna.
Context: Lithuanian Hygiene Standard HN 80:2015 sets permissible EMR power density at 10 μW/cm². Household devices routinely approach or exceed this threshold in close-proximity use. The testing aimed to quantify how Aires resonator-converters affect the measured electric field strength of common 0.9–2.5 GHz EMR sources (mobile phones, Wi-Fi routers) in both transmission and reflection measurement modes, across far-field (distance >10λ) and near-field (distance <10λ) zones.
Devices Tested
Aires Black Crystal
Self-affine circular diffraction grating resonator; antenna-coupled; tested at 900 MHz–2.5 GHz
Aires Shield
Self-affine resonator; tested in both optical transmission and optical reflection configurations
Aires Defender
Larger-format self-affine resonator; tested across full 0–8 GHz band including far-field measurements
Test Methodology
Testing was conducted in the VGTU laboratory at room temperature, using the Signal Hound Spectrum Analyzer (100 Hz–8 GHz) operating with FFT analysis of pulsed signals. Measurement accuracy: ±1.0 dB at 50 MHz–1.9 GHz; ±2.4 dB at 1.9–35 GHz; isotropic deviation: ±1.0 dB.
Two measurement configurations:
- Optical transmission mode: Resonator-converter placed between transmitter and receiver; residual signal at receiver measured with and without RC in line
- Optical reflection mode: Resonator-converter placed with one face toward both transmitter and receiver; reflection-side field measured
At each fixed receiver position, the transmitter was gradually moved to different distances, allowing field strength vs. distance profiles to be established with and without the resonator-converter. Power levels: 0.5 W (Transmitter 1), 2 W (Tx2), 400 W (Tx3), 800 W (Tx4). High-power transmitters were used to minimize measurement error. All measurements were conducted per Lithuanian Hygiene Standard HN 80:2011.
Results
Independent Testing and Theoretical Partner
The VGTU Photovoltaic Technology Laboratory functioned as the independent experimental testing partner. Prof. Gennadi Lukyanov (ITMO University, St. Petersburg — the same institution that contributed to the 2026 thermal imaging paper) was designated to conduct theoretical simulation of the experimental results as part of the project collaboration. This established the long-term VGTU-ITMO-Aires research partnership that has continued through subsequent studies.
Conclusion and Further Plans
Phase I established the baseline measurement framework and confirmed that the Aires resonator-converters produce a statistically significant, measurable effect on incident EMR fields in the 0.9–2.5 GHz range — a 27% average reduction in electric field strength. Phase I identified which RC characteristics were most suitable for further testing and provided the specification basis for subsequent Phase II and multi-stage testing programs.
Laboratory: VGTU Photovoltaic Technology Laboratory, Vilnius | Head: Dainius Jasaitis | Consultant: Prof. Artūras Jukna | Year: 2016