The 2017 Vilnius Phase II report connects measured changes in the RF field with an investigation of how an Aires resonator responds to excitation. Its experiments include individual prototypes and two groups of four resonators. Its final section presents the authors’ explanation of broadband emission under sufficiently strong excitation. Open the Phase II report.
This phase builds a cumulative engineering case. Phase I measured how an Aires structure changed the received field; Phase II examined groups of resonators and their excitation mechanism; Phase III tested how their arrangement changed the response. Alongside that physics work, the 2014 phone EEG study and 2019 EEG recovery findings reported changes in the brain’s response with Aires technology. The larger program connects a physical intervention with biological measurements—the foundation of Aires’ environmental approach.
The measured four-resonator result
With an 800 W source centered at 2.5 GHz and the groups placed directly in front of the transmitter, the electric-field amplitude decreased by an average of 25% for group (a) and 22% for group (b). The receiver moved progressively away from the source. Figures 7 and 8 show those distance-dependent measurements. View both groups and their field measurements.
How the authors explain broadband emission
The authors describe a near-field condition in which an incident wave reaches the resonator’s excitation threshold and creates conditions for electrical breakdown inside the structure. Their explanation links the resulting burst of frequencies to the incident wave, the material environment and the internal fractal structure. Read the mechanism discussion in the conclusions.
The power quantities in that discussion refer to different parts of the setup. The report gives approximately 2 W for the 0.9 GHz source threshold, then estimates the power incident on the resonator’s surface at approximately 490 mW. It rounds that latter estimate to about 0.5 W in its final conclusion. The calculation includes the resonator’s surface area and its distance from the source. Inspect the equation and preliminary estimate.
The research question this opened
The authors proposed further modeling and experiments on the orientation, spacing and arrangement of multiple resonators. Phase III followed that direction by measuring planar and spatial groups at 2.4 GHz. It provides a way to examine how the fields reflected by different parts of an arrangement combine at the receiver.
For someone investigating EMF protection, this sequence makes the engineering questions concrete. The physical response depends on the source and the structure it encounters. Biology is then measured in its own experimental setup.
Who commissioned and performed the tests
The work was commissioned by UAB AIRESLITA and performed at the Laboratory of Photovoltaic Technology in Vilnius, Lithuania. The cover identifies Artūras Jukna, Head of the Physics Department, and Dainius Jasaitis, Head of the Laboratory, at Vilnius Gediminas Technical University.
See the named organizations and researchers on the report cover.
Follow the physics research
- Phase I and the importance of receiver distance
- Phase II and the two four-resonator groups
- Phase III and spacing in a circular array
- Lukyanov and Makarov’s 2026 ICICT infrared experiment, published by Springer
These studies examine how a patterned structure interacts with an electromagnetic field. Aires also investigates the biological response during device use. The 2026 Lifetune ONE human EEG paper provides that next part of the research.
Updated November 6, 2026 · Josh, Aires. Findings and figures are credited to the original research linked above.